DRYNG OVEN LABORATORY PT OCTA PRIMA LESTARI
Harga :
Rp. 33.000.000 / Unit
Pembelian Minimal :
1 Unit
Pengiriman :
1 hari sejak pembayaran
Lokasi :
DKI Jakarta - Jakarta Timur
Update Terakhir :
02-12-2021 11:14
Dapatkan Spesifikasi Harga
DRYNG OVEN LABORATORY PT OCTA PRIMA LESTARI Produk Terbaik dari
PT OCTA PRIMA LESTARI PH METER , SOUND LEVEL METER , LUX METER , DATA LOGGER , OPACITY , HIGH VOLUME AIR SAMPLER , AUTOCLAVE ,WATER FLOW METER , LAMINAR AIR FLOW , FUME HOOD , FLOCCULATOR , FLAME PHOTOMETER , PARTICLE COUNTER , MELTING POINT APP , MUFFLE FURNACE , HOTPLATE &
Detail Produk
UN55 UNIVERSAL OVEN MEMMERT
Precise drying, heating, ageing, burn-in and hardening in research, science, industry and quality assurance
Temperature
| Working temperature range |
at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature to +300 °C |
| Setting accuracy temperature |
up to 99.9 °C: 0.1 / from 100 °C: 0.5 |
| Setting temperature range |
+20 to +300°C |
| Temperature sensor |
1 Pt100 sensor DIN class A in 4-wire-circuit |
Control technology
| Language setting |
German, English, Spanish, French, Polish, Czech, Hungarian |
| ControlCOCKPIT |
SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-colour display |
| Timer |
Digital backwards counter with target time setting, adjustable from 1 minute to 99 days |
| Function SetpointWAIT |
the process time does not start until the set temperature is reached |
| Calibration |
three freely selectable temperature values |
| adjustable parameters |
temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime |
Ventilation
| Convection |
natural convection |
| Fresh air |
Admixture of pre-heated fresh air by electronically adjustable air flap |
| Vent |
vent connection with restrictor flap |
Communication
| documentation |
programme stored in case of power failure |
| Programming |
AtmoConTROL software for reading out, managing and organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoConTROL software available as accessory (on demand). |
Safety
| Temperature control |
adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature |
| Autodiagnostic system |
for fault analysis |
Standard equipment
| Door |
fully insulated stainless steel door with 2-point locking (compression door lock) |
| Internals |
1 stainless steel grid(s), electropolished |
| Works calibration certificate |
Calibration at +160°C |
